RADWAG BALANCES 3Y SERIES - Manual (Page 14)

- 14 -
2.4. Balances PS 3Y series
Carefully remove the balance from its packaging, remove the plastic and foil
transport protective elements, and gently place the balance in its intended
place of use. Install the weighing pan, and other elements according to below
scheme.
Precision balances PS 3Y series
A – balance with reading unit d=1mg
B – balance with reading unit d=10mg
On installing the balance in its
intended place of use, assembly:
1 – weighing pan mandrels
2 – weighing pan
3 – pan shield /in case of d=1mg/
On assembling all components,
connect peripheral devices to the
balance, and plug the balance to
mains. Power socket is located at the
back of balance’s housing.
2.5. Balances APP 3Y series
Gently take the balance out of its packaging, remove plastic, carton, foil and
transport protections, and gently place the balance in its intended place of use.
After unpacking unscrew bolt 1 which locks the
adjustment mechanism.