RADWAG BALANCES 3Y SERIES - Manual (Page 69)

- 69 -
o
WEIGHING
− N (number of measurements)
− Date
− Time
− Level status
− Client
− Warehouse
− Product
− Packaging
− Universal variable 1 … 5
− Net
− Tare
− Gross
− Current measurement result
− Supplementary weighing unit
− Mass
− Non-standard printout
o
FOOTER
− Working mode
− Date
− Time
− Balance type
− Balance ID
− User
− Level status
− Client
− Warehouse
− Product
− Packaging
− Universal variable 1 … 5
− Dashes
− Empty line
− GLP report
− Signature
− Non-standard printout
BASIC PRINCIPLES OF USING PRINTOUTS
1. Press PRINT key on balance’s overlay to print variables that are
contained in section WEIGHING of the standard printout, and if they
are attributed = YES (see above list of variables in printouts).
2. Variables attributed as YES present in the HEADER and FOOTER are
printed ONLY on pressing Print Header and Print Footer soft
keys. The soft keys have to be added to the bottom bar of the
display, as quick access keys.
Adding quick access keys on the bottom bar of the display is
described in point 15.3 of this user manual.