RADWAG BALANCES 3Y SERIES - Manual (Page 150)

- 150 -
27.7. Aborted control restoring procedure, power loss case
Program keeps records of control results continuously, this prevents loss of data
(for control being in progress) in case of disconnection from mains. For power
loss case the program allows to complete an aborted control upon reconnection
to mains.
CAUTION:
The weighing pan cannot be loaded before being connected to mains
again. Balance activation should be carried out when the weighing pan
is empty.
During balance activation the program searches for any in course control
procedure. If there is one, message “Restore interrupted control?” is displayed
on the end of balance activation.
Press button
to leave control procedure and proceed to weighing.
Press button to complete aborted control procedure. Upon pressing button
control procedure continues from the moment of its abortion.
27.8. Non-destructive average tare control mode
Before control the user may perform estimation of average tare by weighing
packagings. It is possible upon activation <Average tare determining>
function. To activate this function the user must go to setting window of PGC
mode and press grey coloured field of the main display of <SETTINGS>
parameters.
During tare control the following window is displayed: