RADWAG BALANCES 3Y SERIES - Manual (Page 182)

- 182 -
29.16. Ambient conditions
Database of ambient conditions contains parameters related to measurement
of ambient conditions at a workstation. Depending on balance’s configuration,
a report may contain data on temperature, humidity and value of atmospheric
pressure. In case a THB ambient conditions module is connected to a balance,
records from the module are also saved.
Procedure
•
Enter submenu < Databases>, and press < Ambient conditions >
field
•
Press field of a desired report record, unless it is visible on the top of the
list, wind the list forward using navigating keys
•
Report’s name consists of date and time
Caution:
It is possible to use an option for searching a report.
29.17. Packages
Database of packages contains list of packages for which a name, code and
mass value are specified. During weighing process, if a name of packaging is
selected from the database, the tare value is automatically applied. The
display indicates mass value with minus sign.
Procedure
•
Enter submenu < Databases>, and press < Packages> field
•
Press < Add > key should a new packaging be added
•
If a packaging record already exists in the database, press field with its
name, and insert data on the packaging.
Caution:
It is possible to use an option for searching a record by name or code.
29.18. Warehouses
Depending on work organizing, the Database of Warehouses contains list of
places used for picking up a sample for weighing or list of places to which a
weighed sample was delivered. Each Warehouse should have its name, code
and description specified. While weighing process, and on selecting name of a
Warehouse, it is automatically assigned to the measurement result.
Procedure
•
Enter submenu < Databases>, and press < Warehouses> field
•
Press < Add > key should a new warehouse be added
•
If a warehouse record already exists in the database, press field with its
name, and insert identifying data.