RADWAG BALANCES 3Y SERIES - Manual (Page 99)

- 99 -
Threshold
It is a value expressed in mass measuring units.
in order to start measurement, the indication has to exceed value set in
the threshold.
3. set mode’s operating parameters and return to weighing,
4. load weighed object on balance’s weighing pan and press < > key,
5. on completing the measurement, the display indicates and “locks” the
measurement result,
6. the following measurement is carried out on pressing < > key:
- in case of manual operation mode, press < > key,
- in case of automatic operation mode, unload weighed object from the
weighing pan and load the following object to be weighed.
21.2. Additional settings of animal weighing mode
The additional settings enable adjusting the working mode to user’s needs and
requirements. To access the setting follow below procedure:
Procedure:
1. Press grey coloured workspace,
2. Press menu <Settings>,
3. The display indicates functions related to checkweighing, such as:
− Result control
− Tare mode
− Automatic footer printout
− Printout mode / Value release
− Printout
Means of using the above functions are given in point 10.8. “Additional
parameters on weighing process”.