RADWAG BALANCES 3Y SERIES - Manual (Page 156)

- 156 -
Press button to print report on a printer connected to the balance. Press
to get back to setting window of < PGC> mode without printing the
report.
Caution:
For cooperation with <
E2R System> summary process message shall not
contain a query for report printout. All data are automatically sent to a computer
program, report may be printed by means of a computer.
If during the control course the number of negative T errors detected by the
software requires controlling another sample from the batch (as specified by the
regulation on CPG), then on completing the measuring process of sample 1 the
software displays a command to control another sample from the batch:
Press button
for confirmation, the text and tolerable number of errors will
actualize. Upon completion of second sample control the program will generate
summary of the control. Report on performed control may be printed on a
printer connected to a balance.
Caution:
A template and an example of a report on product control is provided further
down this user manual.
27.9. Non-destructive empty – full control mode
For „Non-destructive empty – full” control the user pre-sets „batch” to be
measured. The “batch” is pre-set in a product data. The program accordingly to
the pre-set “batch” displays a message asking the user to weight empty
packagings first, next full in the same order: