RADWAG BALANCES 3Y SERIES - Manual (Page 191)

- 191 -
Icon with a padlock, placed by a given network name requires password for
the network. Press <Refresh> icon to search for available networks.
To check selected network parameters press <Network status> field, you will
see a window with the respective information:
The selected network and parameters for connection are stored in the balance
program. The program connects to the network using the stored parameters
each time the balance is activated. The user may change this by selecting
<Forget network> option. The option disconnects the given network.
30.4. TCP protocol settings
TCP, i.e.Transmission Control Protocol enables communicating two computers.
The TCP operates in client-server mode. The server pends for establishing a
connection on a specified port, and the client establishes connection with a
server.
Procedure of setting a port for “TCP” protocol:
−
Enter group of parameters < Communication>,
−
Select: „ Tcp / Port” which opens a window <Port> with on-screen
keyboard,
−
Insert required port number and accept by pressing key.
31. PERIPHERAL DEVICES
Menu PERIPHERAL DEVICES is located in menu group Parameters. It is
accessed by pressing Setup key or <
Setup > quick access key. Inside the
menu, there is a list of connectable peripheral devices, which can cooperate
with a balance.