RADWAG BALANCES 3Y SERIES User Manual
Page 17
- 17 -
4. Remove the weighing pan and the pan shield so as not to damage the
mechanism while carrying out the cleaning process.
Thus prepared draft shield and its glass parts may be thoroughly cleaned. Carry
out the cleaning process carefully using the most gentle movements. Pay attention
to dirt and any small items, they could affect balance operation if they got inside
the balance through the opening that serves to mount the weighing pan.
Upon completion of the cleaning process assembly the balance, take actions like
before but in a reverse order. Pay a special attention to left and right side glass,
assembly it on the correct side of the balance. While sliding the glass back onto its
place remember to pull the protection (like before when dismantling the draft
shield).
XA 3Y series balance
Steps:
1. Unscrew and remove top glass protection, next slide the top glass out.