RADWAG BALANCES 3Y SERIES - Manual (Page 180)

- 180 -
Example no. 2 a balance AS 220.3Y:
No. Tare value Minimum
sample
Means of operation
1 220.0000 g 0.5000 g The minimum sample refers to all net
weighments that are weighed in a
packaging with optional mass from full
measuring range of a balance (the <TARE>
button applied), as well as on weighing
samples without the packaging (the
<TARE> button is not applied).
Example no. 3 a balance AS 220.3Y:
No. Tare value Minimum
sample
Means of operation
1 0.0000 g 0.2500 g The minimum sample refers to all net
weighments that are weighed without a
packaging (the <TARE> button is not
applied).
The software identifies this setting as the
minimum sample is valid only for weighing
samples without a packaging. If tarring
option is applied then the software disables
the pictogram informing on minimum
sample in use, and renders the weighment
as carried out with tare applied, that does
not have a minimum sample criterion
determined.
The user can preview entered data, but data editing is disabled.
29.15. Mass controls
(mode not available in standard version of the balance)
Each product control carried out on a balance is sent to a connected printer and
saved in the < Mass controls >database. Each control saved in the database
features its specific number set at the moment of its completion.
Mass control number format:
y y / M M / d d / H H / m m, where:
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end.
Balance user can preview data on each control.