Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter - Manual (Page 104)

5-12 Using the I/O
20-COMM-E EtherNet/IP Adapter User Manual
Publication 20COMM-UM010G-EN-P
Figure 5.1 ControlLogix Program Tags for Drive Add-on Profile Ladder Logic
Program Example
An example ladder logic program that uses the automatically created
descriptive Controller tags and passes their data to the user-defined Program
tags is shown in
Figure 5.2 and Figure 5.3 . Note that the prefix for the drive
Controller tags is determined by the name assigned when configuring the
I/O (
Chapter 4 ).
Depending on the drive being used, see one of the following subsections for
information on speed Reference and Feedback scaling.
Figure 5.2 ControlLogix Example Ladder Logic Program Using a Drive Add-on
Profile for Logic Status/Feedback
Subsection Page
PowerFlex 70/700/700H and PowerFlex 700L Drives with 700 Control 5-7
PowerFlex 700S and PowerFlex 700L Drives with 700S Control 5-8
PowerFlex 753/755 Drives 5-8
PowerFlex Digital DC Drives 5-8