Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter User Manual
Page 59
Configuring the I/O
4-13
20-COMM-E EtherNet/IP Adapter User Manual
Publication 20COMM-UM010G-EN-P
2. Click the Drive tab.
3. Click Connect to Drive to begin the correlation process.
The Connect To Drive screen appears.
4. Browse the communication path to the drive and select the drive.
5. Click OK.
After the drive configuration data has been verified, a pop-up dialog
box appears, which synchronizes ports from the online drive to the
project to be sure that correct Datalinks are assigned.
6. Click OK.
If the Differences Found screen appears—which is typical, click
Download. This will download the project settings from the controller
to the drive and its connected adapter. If Upload is clicked, the drive
and adapter settings are uploaded to the controller.
7. When the Reset Comm Module screen appears, click Yes to reset the
communication adapter so that the new I/O settings take effect.
TIP: On subsequent connections to the drive (after initial download),
click Upload.