Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter - Manual (Page 52)

4-6 Configuring the I/O
20-COMM-E EtherNet/IP Adapter User Manual
Publication 20COMM-UM010G-EN-P
In our example, we right-click on the 1756-ENBT/A bridge. Expand the
Drives group to display all of the available drives with their
communication adapters.
2. From the list, select the drive and its connected adapter.
For this example, we selected ‘PowerFlex 70 EC-E’.
3. Click OK.
The drive’s New Module screen appears.
4. On the General tab, edit the following data about the drive/adapter.
5. On the New Module screen in the Module Definition section, click
Change… to launch the Module Definition screen and begin the drive/
adapter configuration process.
TIP: If the PowerFlex drive is not shown, go to http://www.ab.com/
support/abdrives/webupdate and download the latest RSLogix 5000
drive Add-on Profile.
Box Setting
Name A name to identify the drive.
Description Optional – description of the drive/adapter.
IP Address The IP address of the adapter.