Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter User Manual

Page 228

Advertising
background image

B-2

Adapter Parameters

20-COMM-E EtherNet/IP Adapter User Manual

Publication 20COMM-UM010G-EN-P

12

13

14

15

[Gateway Cfg 1]

[Gateway Cfg 2]

[Gateway Cfg 3]

[Gateway Cfg 4]
Sets the gateway address bytes for the adapter’s

gateway address when

Parameter 03 - [BOOTP]

is set to ‘0’ (Disabled).

Default:

0

Default:

0

Default:

0

Default:

0

Minimum:

0

Maximum:

255

Type:

Read/Write

Reset Required: Yes

16

[EN Rate Cfg]
Sets the speed and duplex network data rate at

which the adapter communicates. (Updates

Parameter 17 - [EN Rate Act] after a reset.)

Default:

0 = Autodetect

Values:

0 = Autodetect

1 = 10 Mbps Full

2 = 10 Mbps Half

3 = 100 Mbps Full

4 = 100 Mbps Half

Type:

Read/Write

Reset Required: Yes

17

[EN Rate Act]
Displays the actual speed and duplex network data

rate used by the adapter.

Values:

0 = No Link

1 = 10 Mbps Full

2 = 10 Mbps Half

3 = 100 Mbps Full

4 = 100 Mbps Half

Type:

Read Only

18

[Ref/Fdbk Size]
Displays the size of the Reference/Feedback. The

drive determines the size of the Reference/

Feedback.

Values:

0 = 16-bit

1 = 32-bit

Type:

Read Only

19

[Datalink Size]
Displays the size of each Datalink word. The drive

determines the size of Datalinks.

Values:

0 = 16-bit

1 = 32-bit

Type:

Read Only

20

[Reset Module]
No action if set to ‘0’ (Ready). Resets the adapter if

set to ‘1’ (Reset Module). Restores the adapter to

its factory default settings if set to ‘2’ (Set Defaults).

This parameter is a command. It will be reset to ‘0’

(Ready) after the command has been performed.

Default:

0 = Ready

Values:

0 = Ready

1 = Reset Module

2 = Set Defaults

Type:

Read/Write

Reset Required: No

Parameter
No. Name and Description

Details

255.255.255.255

[Gateway Cfg 1]

[Gateway Cfg 2]

[Gateway Cfg 3]

[Gateway Cfg 4]

!

ATTENTION: Risk of injury or equipment damage exists. If the adapter is

transmitting I/O that controls the drive, the drive may fault when you reset the

adapter. Determine how your drive will respond before resetting a connected

adapter.

Advertising