Features, Features -2 – Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter User Manual

Page 16

Advertising
background image

1-2

Getting Started

20-COMM-E EtherNet/IP Adapter User Manual

Publication 20COMM-UM010G-EN-P

Features

The features of the adapter include the following:

• Typical mounting in a PowerFlex 7-Class drive. The 20-COMM-E Series

B adapter, firmware 3.xxx or later, can also be installed in a DPI External
Comms Kit and used with the kit’s optional I/O board. See

Chapter 9

,

Using the Adapter in a DPI External Comms Kit
(20-XCOMM-DC-BASE)

for more information.

DPI External Comms Kit Compatibility

• Captive screws to secure and ground the adapter to the drive or, when

mounted in a DPI External Comms Kit, to the kit’s metal enclosure.

• Compatibility with various configuration tools to configure the adapter

and connected host drive, including the following tools:

– PowerFlex HIM (Human Interface Module) on the drive, if available
– Connected Components Workbench software, version 1.02 or later
– DriveExplorer software, version 2.01 or later
– DriveExecutive software, version 3.01 or later

Additionally, you can use a BOOTP server to configure the network
address for the adapter.

• Status indicators that report the status of the drive communications, the

adapter, and network. They are visible when the drive cover is open or closed.

• Parameter-configured I/O (Logic Command/Reference and up to four

pairs of Datalinks) to accommodate application requirements.

• Explicit Messaging support.

• Master-Slave or Peer-to-Peer hierarchy that can be configured to transmit

data to and from either a controller or another PowerFlex drive on the
network.

• User-defined fault actions to determine how the adapter and connected

PowerFlex drive respond to the following:

– I/O messaging communication disruptions (Comm Flt Action)
– Controllers in idle mode (Idle Flt Action)

• Web pages, viewed by using a web browser, that show information about

the adapter, its connected host drive, and DPI devices connected to the drive.

• Configurable e-mail messaging to desired addresses when selected drive

faults occur and/or are cleared, and/or when the adapter takes a
communication or idle fault action.

• Access to any PowerFlex drive and its connected peripherals on the

network to which the adapter is connected.

20-COMM-E Adapter

Operation With

Series

Firmware

Revision

DPI External Comms Kit

(20-XCOMM-DC-BASE)

Optional I/O Board

(20-XCOMM-IO-OPT1)

A

2.xxx and earlier

No

No

B

3.xxx and later

Yes

Yes

Advertising