Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter - Manual (Page 291)

Index-3
20-COMM-E EtherNet/IP Adapter User Manual
Publication 20COMM-UM010G-EN-P
hold last
configuring the adapter for,
3-14
definition, G-4
Host DPI Parameter object, C-30
host IDs,
G-5
I
I/O
about, 5-1
configuring for
ControlLogix controller,
4-2
MicroLogix 1100/1400 controller,
4-39
PLC-5 controller, 4-23
SLC 500 controller, 4-31
configuring the adapter for, 3-7
definition,
G-5
limitations when using PLC-5, SLC 500, or
MicroLogix 1100/1400 controller,
4-22
understanding the I/O image, 5-2
using with
ControlLogix controller,
5-11
MicroLogix 1100/1400 controller,
5-21
PLC-5 controller, 5-21
SLC 500 controller, 5-21
I/O Board option - in DPI External Comms Kit
configuring adapter to use optional I/O data,
9-3
understanding the I/O image, 9-2
using Datalink D to send I/O data, 9-2
viewing optional I/O diagnostic data, 9-4
Identity object, C-2
idle action, G-5
Idle Flt Action parameter,
B-3
installation
applying power to the adapter, 2-6
commissioning the adapter,
2-8
connecting to the
drive, 2-3
network, 2-6
preparing for,
2-1
Internal Interface cables
connecting to the
adapter, 2-4
drive,
2-4
illustration, 2-4
IP Addr Cfg 1-4 parameters, B-1
IP address
definition/classes,
G-5
setting with BOOTP server, 3-3
setting with parameters, 3-5
L
LCD HIM, 3-2
LED HIM,
3-2
LEDs, see status indicators or name of indicator
Logic Command/Status
bit definitions for
PowerFlex 70/700/700H, and 700L (with
700 Control) drives,
D-1
PowerFlex 700S (Phase II Control) and
700L (with 700S Control) drives,
D-3
PowerFlex 750-Series drives,
D-5
PowerFlex Digital DC drives, D-7
definition, G-6
in I/O image for
ControlLogix controller, 5-2
PLC-5, SLC 500, or MicroLogix 1100/1400
controllers,
5-4
using, 5-6
M
MAC address, see hardware address
manual
conventions,
P-1
related documentation, P-2
website, P-2
Master-Slave hierarchy
configuring adapter for, 3-8
definition, G-6
mechanical dimensions,
A-2
messages, see explicit messaging or I/O
MicroLogix 1100/1400 controller
configuring the I/O,
4-39
explicit messaging,
6-53
limitations when using the I/O, 4-22
using the I/O, 5-21
MOD status indicator
locating, 7-1
troubleshooting with, 7-2
mounting the adapter,
2-5
M-S Input parameter, B-4
M-S Input parameter configurations, 3-8
M-S Output parameter,
B-5