Appendix b, Adapter parameters, Parameter list – Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter User Manual
Page 227: Badapter parameters, Appendix
20-COMM-E EtherNet/IP Adapter User Manual
Publication 20COMM-UM010G-EN-P
Appendix
B
Adapter Parameters
This appendix provides information about the adapter parameters. For
configuration tools to monitor or change parameter values of the drive,
adapter, and other connected peripherals, see
.
Parameter List
Parameter
No. Name and Description
Details
01
[DPI Port]
Displays the port to which the adapter is
connected. This will usually be port 5.
Minimum:
0
Maximum:
7
Type:
Read Only
02
[DPI Data Rate]
Displays the data rate used by the drive. This data
rate is set in the drive and the adapter detects it.
Values:
0 = 125 kbps
1 = 500 kbps
Type:
Read Only
03
[BOOTP]
Configures the adapter to use BOOTP so that you
can set its IP address, subnet mask, and gateway
address with a BOOTP server.
Default:
1 = Enabled
Values:
0 = Disabled
1 = Enabled
Type:
Read/Write
Reset Required: Yes
04
05
06
07
[IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
Sets the IP address bytes for the adapter’s network
address when
Parameter 03 - [BOOTP] is set to
‘0’ (Disabled).
Default:
0
Default:
0
Default:
0
Default:
0
Minimum:
0
Maximum:
255
Type:
Read/Write
Reset Required: Yes
08
09
10
11
[Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
Sets the subnet mask bytes for the adapter’s
network address when
Parameter 03 - [BOOTP] is
set to ‘0’ (Disabled).
Default:
0
Default:
0
Default:
0
Default:
0
Minimum:
0
Maximum:
255
Type:
Read/Write
Reset Required: Yes
255.255.255.255
[IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
255.255.255.255
[Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]