Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter - Manual (Page 70)

4-24 Configuring the I/O
20-COMM-E EtherNet/IP Adapter User Manual
Publication 20COMM-UM010G-EN-P
Creating RSLogix 5 Project, Version 7.00 or Later
To transmit (read and write) data between the controller and drive, you must
create message instructions that allocate data table addresses in the
controller for Logic Command/Status, Reference/Feedback, and Datalinks.
Note that three messages need to be configured. The timeout message has to
be executed first before the Logic Command, Reference, and Datalink In/
Out messages will work.
Select the Controller
1. Start RSLogix 5 software.
The RSLogix 5 window appears.
2. Select File > New to display the Select Processor Type screen.
3. Assign a name for the processor.
4. From the pull-down menus, choose the appropriate selections to match
your PLC-5 controller and application.
5. Click OK.
The RSLogix 5 project window appears.