Rockwell Automation 20-COMM-E PowerFlex EtherNet/IP Adapter - Manual (Page 27)

Installing the Adapter 2-7
20-COMM-E EtherNet/IP Adapter User Manual
Publication 20COMM-UM010G-EN-P
Figure 2.5 Drive and Adapter Status Indicators (location on drive may vary)
Table 2.A Drive and Adapter Start-Up Status Indications
For more details on status indicator operation, see page 7-2 and page 7-3 .
➋
➊
PORT
MOD
STS
NET A
NET B
Item Name Color State Description
Drive STS Indicator
➊ STS
(Status)
Green Flashing Drive ready but not running, and no faults are present.
Steady Drive running, no faults are present.
Yellow Flashing,
drive stopped
An inhibit condition exists – the drive cannot be started. Check drive
Parameter 214 - [Start Inhibits].
Flashing,
drive running
An intermittent type 1 alarm condition is occurring. Check drive
Parameter 211 - [Drive Alarm 1].
Steady,
drive running
A continuous type 1 alarm condition exists. Check drive Parameter
211 - [Drive Alarm 1].
Red Flashing A fault has occurred.
Steady A non-resettable fault has occurred.
Adapter Status Indicators
➋ PORT Green Flashing Normal operation. The adapter is establishing an I/O connection to
the drive. It will turn steady green or red.
Steady Normal operation. The adapter is properly connected and
communicating with the drive.
MOD Green Flashing Normal operation. The adapter is operating but is not transferring I/O
data to a controller.
Steady Normal operation. The adapter is operating and transferring I/O data
to a controller.
NET A — Off Normal operation. BOOTP is enabled or a valid IP address is not set.
Green Flashing Normal operation. BOOTP is disabled, the adapter is properly
connected, has an IP address, and is connected to an EtherNet/IP
network but does not have an I/O connection.
Steady Normal operation. The adapter is properly connected and
communicating on the network to a controller.
NET B — Off Normal operation. The adapter is properly connected but is idle.
Green Flashing Normal operation. The adapter is properly connected, BOOTP is
enabled, and the adapter is transmitting data packets on the network.