Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 11)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 11
Chapter
1
Getting Started
The EtherNet/IP adapter, embedded on the Main Control Board in PowerFlex
755 drives, is used for network communication.
Components
Topic Page
Components 11
Features 12
Compatible Products 13
Required Equipment 13
Safety Precautions 15
Quick Start 16
0
5
4
9
3
8
2
7
1
6
0
5
4
9
3
8
2
7
1
6
0
5
4
9
3
8
2
7
1
6
➊
➍
➌
➋
Item Part Description
➊ Status
Indicators Two LEDs that indicate the status
of the adapter and network
communication. See
Chapter 7 ,
Troubleshooting.
➋ IP Address
Switches Sets the IP address of the
embedded adapter when not
using a BOOTP server or adapter
parameters. See
Setting the IP
Address on page 18 for details.
➌ Ethernet
Connector An RJ-45 connector for the
Ethernet cable. The connector is
CAT-5 compliant to ensure reliable
data transfer on 100Base-TX
Ethernet connections.
➍ DPI Port 2 Cable connection for handheld
and remote options.
Drive Control Pod
Drive STS Indicator
Components shown with HIM bezel
open and drive cover removed.