Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 87)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 87
Using the I/O Chapter 5
Controller Tags
When you add the adapter and drive to the I/O configuration ( Chapter 4 ),
RSLogix 5000 software automatically creates generic (non-descriptive) controller
tags. In this example program, the following controller tags are used.
You can expand the Input and Output tags to reveal the input and output
configuration. The Input tag for this example program requires nineteen 32-bit
words of data (
Figure 14 ). The Output tag for this example program requires
eighteen 32-bit words of data ( Figure 15 ).
Figure 14 - ControlLogix Controller Input Image for Drive Generic Profile Example Ladder Logic
Program
Figure 15 - ControlLogix Controller Output Image for Drive Generic Profile Example Ladder Logic
Program