Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 9)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 9
Preface
This manual provides information about the EtherNet/IP adapter embedded on
the Main Control Board in PowerFlex® 755 drives, and using it for network
communication.
Conventions Used in This
Manual The following conventions are used throughout this manual:
• Parameter names are shown in the format Parameter xx - [*]. The xx
represents the parameter number. The * represents the parameter name—
for example Parameter 01 - [DL From Net Cfg 01].
• The drive firmware revision number (FRN) is displayed as FRN
X.xxx,
where ‘
X’ is the major revision number and ‘xxx’ is the minor revision
number.
• The dialog box images in this manual resulted from using the following
software:
– RSLinx® Classic software, version 2.52
– RSLogix™ 5000 software, version 16.00 (for Automatic Device
Configuration information only, RSLogix 5000, version 20.00)
Different versions of the software may have dialog boxes that vary in
appearance, and differences in procedures.
Rockwell Automation
Support Rockwell Automation offers support services worldwide, with over 75 sales and
support offices, over 500 authorized distributors, and over 250 authorized
systems integrators located through the United States alone. In addition,
Rockwell Automation representatives are in every major country in the world.
Local Product Support
Contact your local Rockwell Automation representative for the following:
• Sales and order support
• Product technical training
• Warranty support
• Support service agreements
Technical Product Assistance
For technical assistance, please review the information in Chapter 7 ,
Troubleshooting, first. If you still have problems, then access the Allen-Bradley
Technical Support website at
http://www.ab.com/support/abdrives or contact
Rockwell Automation.