Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter User Manual
Page 51
Advertising
Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
51
Configuring the I/O
Chapter 4
The drive’s New Module dialog box appears.
4.
On the General tab, edit the following data about the drive/adapter:
5.
On the New Module dialog box in the Module Definition section, click
Change to launch the Module Definition dialog box and begin the drive/
adapter configuration process.
Box
Setting
Name
A name to identify the drive.
Description
Optional – description of the drive/adapter.
IP Address
The IP address of the adapter.
TIP
To get the latest RSLogix 5000 drive Add-on Profile, go to
.
Advertising