Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 110)

110 Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
Chapter 7 Troubleshooting
27 DL To Net 01 Val The present value of respective DL To Net xx parameter being received from the drive by this adapter. (If not using a
Datalink, its respective value should be zero.)
28 DL To Net 02 Val
29 DL To Net 03 Val
30 DL To Net 04 Val
31 DL To Net 05 Val
32 DL To Net 06 Val
33 DL To Net 07 Val
34 DL To Net 08 Val
35 DL To Net 09 Val
36 DL To Net 10 Val
37 DL To Net 11 Val
38 DL To Net 12 Val
39 DL To Net 13 Val
40 DL To Net 14 Val
41 DL To Net 15 Val
42 DL To Net 16 Val
43
44
45
46
47
48 HW Addr 1
HW Addr 2
HW Addr 3
HW Addr 4
HW Addr 5
HW Addr 6 Decimal value of each byte in the adapter’s Ethernet hardware address.
49
50
51
52 IP Addr Act 1
IP Addr Act 2
IP Addr Act 3
IP Addr Act 4 Value of each byte in the adapter’s present IP address. A value of ‘0’ appears if the adapter does not currently have an
IP address.
53
54
55
56 Subnet Act 1
Subnet Act 2
Subnet Act 3
Subnet Act 4 Value of each byte in the adapter’s present subnet mask. A value of ‘0’ appears if the adapter does not currently have
a subnet mask.
Table 11 - Adapter Diagnostic Items (Continued)
No. Name Description
255:255:255:255:255:255
[HW Addr 1]
[HW Addr 2]
[HW Addr 3]
[HW Addr 4]
HW Addr 5]
[HW Addr 6]
255.255.255.255
[IP Addr Act 1]
[IP Addr Act 2]
[IP Addr Act 3]
[IP Addr Act 4]
255.255.255.255
[Subnet Act 1]
[Subnet Act 2]
[Subnet Act 3]
[Subnet Act 4]