Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 136)

136 Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
Appendix B Adapter Parameters
90 [To Peer Skip]
Sets the maximum time that an adapter will wait when
transmitting data to a peer. The value of Parameter 89 - [To
Peer Period] is multiplied by the value of this parameter to set
the time.
Important: Changes to this parameter are ignored when
Parameter 91 - [To Peer Enable] is ‘1’ (On).
Default: 1
Minimum: 1
Maximum: 16
Type: Read/Write
Reset Required: No
91 [To Peer Enable]
Controls whether peer I/O output is operating. A value of ‘0’ (Off)
turns off peer I/O output. A value of ‘1’ (Cmd/Ref) overrides the
settings in Parameters 31 - [DL To Net 15], 32 - [DL To Net
16], 76 - [DLs Fr Peer Cfg], and 77 - [DLs Fr Peer Act], and
automatically sends the drive's present Logic Command (as
Datalink 01) and Reference (as Datalink 02). A value of ‘2’
(Custom) enables peer I/O output using the Datalink count and
settings provided by the user. Default: 0 = Off
Values: 0 = Off
1 = Cmd/Ref
2 = Custom
Type: Read/Write
Reset Required: No
Parameter
No. Name and Description Details