Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 68)

68 Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
Chapter 4 Configuring the I/O
7. On the Controller Properties dialog box, click the Nonvolatile Memory tab.
8. Click Load/Store.
The Nonvolatile Memory Load/Store dialog box appears.
9. From the Automatic Firmware Update pull-down menu, choose Enable
and Store Files to Image.
10. Click <-- Store.
You may see two different continue confirmation dialog boxes relating to
communication disruptions and erasure of the current contents of the
storage card. If okay, click Yes on either dialog box.