Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 28)

28 Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
Chapter 3 Configuring the Adapter
To properly configure devices on your EtherNet/IP network, you must
configure settings in the BOOTP/DHCP software to match the network.
4. From the Tools menu, choose Network Settings.
The Network Settings dialog box opens.
5. Edit the following:
6. Click OK to apply the settings.
Devices on the network issuing BOOTP/DHCP requests appear in the
BOOTP/DHCP Request History list.
Box Type
Subnet Mask
(1)
(1) For definitions of these terms, see the Glossary .
The subnet mask for the embedded EtherNet/IP adapter’s network.
Gateway (1) The IP address of the gateway device on the adapter’s network.
Primary DNS The address of the primary DNS server to be used on the local end of the link for
negotiating with remote devices.
Secondary DNS Optional—the address of the secondary DNS server to be used on the local end of the
link for negotiating with remote devices when the primary DNS server is unavailable.
Domain Name The text name corresponding to the numeric IP address that was assigned to the server
that controls the network.