Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter User Manual
Page 62
Advertising
62
Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
Chapter 4
Configuring the I/O
Configure a PowerFlex 755 Drive for ADC
ADC is configured within the AOP of the PowerFlex 755 drive. Start by creating
or opening a PowerFlex 755 drive in the RSLogix 5000 I/O Configuration
folder.
1.
Open the drive General tab dialog box.
2.
Click Change to open the Module Definition dialog box.
3.
Select the appropriate Electronic Keying for your application.
IMPORTANT
ADC is supported by only PowerFlex 753 drives with firmware 7.001 or later,
and PowerFlex 755 drives with firmware 4.001 or later.
Advertising