Chapter 4, Configuring the i/o, Using rslinx classic – Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter User Manual
Page 45
Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013
45
Chapter
4
Configuring the I/O
This chapter provides instructions on how to configure a Rockwell Automation
ControlLogix controller to communicate with the adapter and connected
PowerFlex drive.
For information on using a PLC-5, SLC 500, or MicroLogix 1100/1400
controller, see Controller Examples for EtherNet/IP Network Communications
with PowerFlex 750-Series Drives, publicat
Using RSLinx Classic
RSLinx Classic software, in all its variations (Lite, Gateway, OEM, and so forth), is
used to provide a communication link between the computer, network, and
controller. RSLinx Classic software requires its network-specific driver to be
configured before communication is established with network devices. To
configure the RSLinx driver, follow this procedure.
1.
Start RSLinx Classic software.
2.
From the Communications menu, choose Configure Drivers to display the
Configure Drivers dialog box.
3.
From the Available Driver Types pull-down menu, choose EtherNet/IP
Driver.
4.
Click Add New to display the Add New RSLinx Driver dialog box.
5.
Use the default name or type a name.
6.
Click OK.
The ‘Configure driver:’ dialog box appears.
7.
Depending on your application, select either the browse local or remote
subnet option.
8.
Click OK.
Topic
Page