Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 65)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 65
Configuring the I/O Chapter 4
11. Click the ADC icon to open the ADC Settings dialog box.
The ADC Settings dialog box provides a single location for ADC
configuration of the drive’s ports. Global checkboxes at the top of each
column checks or unchecks the entire column. Ports can also be turned
on/off individually. See the checkbox selection information in step 6 for
additional details.
The Safety section in the lower part of the ADC Settings dialog box will
only be displayed if a Safe Speed Monitor Module is present.
12. Click OK when finished.
13. Perform all previous steps for each additional PowerFlex 750-Series drive.