Dell PowerVault ML6000 User Manual
Page 137
Chapter 6 Advanced Reporting
Working With Advanced Reporting Reports
Dell PowerVault ML6000 User’s Guide
137
•
Attribute
—Specifies which values are included in the report, and how
they are combined. Select in any combination, including all (default).
If you select no attributes, the report uses Cartridge Barcode.
• Cartridge Barcode — All relevant tape cartridges.
• Drive Physical SN — All relevant tape drives.
• TapeAlert — All TapeAlert flags that were issued. For a
description of all TapeAlert flags, see
.
•
Chart
— Specifies how the data is displayed in the chart. Choose
Area, Bar (default), Line, or Pie.
•
Type
— Specifies the chart type. Select one of the following:
• Rollup (default) — Displays the number of TapeAlerts for the
combination of Grouping and Attributes you selected (default).
• Trend — Shows the occurrence of TapeAlerts over time.
•
Grouping
—Specifies which drive(s) or tape cartridge(s) on which to
base the report. Choose one of the following:
• All (default) — All tape drives and tape cartridges for which a
TapeAlert was issued during the specified Date Range.
• Selected Drive by Physical SN — An individual tape drive. Only
tape drives which issued a TapeAlert during the specified Date
Range appear in the report.
• Selected Cartridge by Barcode — An individual tape cartridge.
Only tape cartridges that were associated with a TapeAlert
during the specified Date Range appear in the report.
•
Sorting
— Specifies how the data will be sorted. Choose from the
following:
• Alphabetical
• Count (ascending)
• Last Occurrence (default)
You can only access this report from the Web client. The path to open the
report is
Reports > Advanced Reporting > Media Integrity Analysis
.