Dell PowerVault ML6000 - Manual (Page 366)

Chapter 12 Installing, Removing, and Replacing
Adding, Removing, and Replacing FC I/O Blades
Dell PowerVault ML6000 User’s Guide 366
middle of the blade and into the locked position. You will feel the
blade pins connect with the 9U Library Expansion Module’s
backplane as the blade locks into place.
6
Remove the necessary number of the black rubber protective covers
from the ports on the FC I/O blades when you are ready to cable the
blade.
Note:
The LEDs for the FC I/O blade are on the bottom of the
blade when the blade is correctly installed in the expansion
module.