Dell PowerVault ML6000 - Manual (Page 296)

Chapter 12 Installing, Removing, and Replacing
Permanently Removing 9U Library Expansion Modules From an Existing Library
Dell PowerVault ML6000 User’s Guide 296
6
Close the library’s I/E station and access doors.
7
Connect all power cords, network data cables, and module-to-
module cables. Make sure the module terminators are installed at the
top and bottom of the stack of modules. For cabling instructions, see
Cabling the Library on page 212.
8
Power on the library.
9
Re-create and/or modify partitions, cleaning slots, and I/E station
slots as desired.
1 Parking tab in “unparked” position