Dell PowerVault ML6000 User Manual
Page 239
Chapter 12 Installing, Removing, and Replacing
Cable Management Guidelines
Dell PowerVault ML6000 User’s Guide
239
1
Facing the rear of the library, locate a specific hole that is drilled into
the back of the 9U Library Expansion Module for the hook-and-loop
fastener. This hole is located on the rear of the library, about three
inches from the top of the 9U Library Expansion Module near the
right side of the library chassis. Refer to the illustration below to
locate this hole.
2
Insert a push rivet into the rivet hole on the black hook-and-loop
fastener. The head of the rivet should be on the same side of the
fastener as the plastic loop.
3
Firmly press the push rivet through the hole in the 9U Library
Expansion Module described above. The hook-and-loop fastener
should now be secured to the library chassis.
4
Plug the power cord into a power supply unit closest to the hook-
and-loop fastener.
5
Determine how much cord length you need to reach and easily plug
into the AC power source. Do not plug the cord into power source
until you are ready to power on the library.
6
If there is excess power cord, loop the excess cord into a bundle in the
shape of a figure-eight. The bundle should be small enough to hold
comfortably with one hand, or about eight inches in length.
7
Wrap the bundle with the hook-and-loop fastener. Thread the strap
through the plastic loop and tighten the strap around the bundled
cord. Secure the strap by pressing it down.
The power cord is now secured to the 9U Library Expansion Module.
Repeat these steps to secure other power cords, if necessary. Bundle
adjacent power cords together using the same hook-and-loop fastener.
Once complete, power cord management for an ML6030 CM plus two
PowerVault ML6000 9U Library Expansion Modules should look similar
Note:
If your module chassis does not have the drilled hole, use an
M5 thumbscrew to attach the black hook-and-loop fastener to
the nearest available M5 threaded hole on the lower right of
any module chassis.