Viewing the library configuration report, Loaded media. see, Viewing – Dell PowerVault ML6000 User Manual

Page 190: The library configuration report

Advertising
background image

Chapter 10 Getting Information – Logs and Reports

Viewing the Library Configuration Report

Dell PowerVault ML6000 User’s Guide

190

key server port number; primary key server serial number; secondary

host (secondary key server IP address or host name); secondary key

server port number; secondary key server serial number.

Library Partitions

— name, serial number, control path, mode,

encryption method, encryption system type, number of slots, number

of media, and number of tape drives configured for each partition.

Tape drives —

location coordinates, vendor name, model, type,

physical serial number (P-SN), logical serial number (L-SN),

firmware level, sled boot version, sled application version,

encryption method, and whether the tape drive is connected to an

I/O blade.

FC I/O blades

— if the library contains FC I/O blades, this table lists

the location coordinates, World Wide Node Name (WWNN),

firmware level, and ready status.

The path to open the report from the Web client is

Reports > System

Information

.

Viewing the Library Configuration Report

The Library Configuration Report is a dynamic representation of the

physical locations of various library resources, including tape drives,

slots, partitions, and modules.
Each partition’s slots are displayed in a unique color, indicated in the

legend. I/E station slots, cleaning slots, and unavailable slots are also

displayed in unique colors. A black triangle in the upper left corner of a

slot indicates media is present in the slot. A red triangle indicates media

is present but the media barcode label is unreadable. A “

c

” in a tape drive

indicates the drive is the control path for the partition.
By default, the Library Configuration Report displays the coordinates for

all licensed slots that are assigned to a partition. To view all library slot

coordinates, click

Show ALL coordinates

. To display the barcodes for all

imported cartridges, click

Show Barcodes

.

Figure 18

shows an example of the Library Configuration Report.

Advertising