Dell PowerVault ML6000 - Manual (Page 372)

Chapter 12 Installing, Removing, and Replacing
Adding, Removing, and Replacing the FC I/O Fan Blade
Dell PowerVault ML6000 User’s Guide 372
4
Evenly apply pressure to both sides of the fan blade and slide it into
the expansion module until the latch hooks begin to move towards
the middle of the blade. Push the latch hooks towards the middle of
the blade and into the locked position. You will feel the blade pins
connect with the 9U Library Expansion Module’s backplane as the
blade locks into place.
1 Fan blade
2 LED
3 Latch hooks, open
Caution: Forcing the blade into the bay can cause the pins to
bend.