Dell PowerVault ML6000 - Manual (Page 48)

Chapter 4 Understanding the User Interface
Web Client
Dell PowerVault ML6000 User’s Guide 48
Web Client
The Web client user interface is similar to the operator panel user
interface. The Web client interface is accessible from supported Web
browsers. See Library Capacity on page 423 for information about
supported browsers.
To manage the library from a remote location, you must set up the
library’s initial network configuration from the operator panel touch
screen. See Configuring Library Security Settings on page 124 for
information on setting the network configuration settings for remote use.
You must disable Web browser popup blockers to use the Web client
interface and the library’s online Help. Add the PowerVault ML6000’s
Internet Protocol (IP) address to the list of trusted/allowed sites on your
PowerVault ML6000-supported browser, so the Web client pages will
automatically refresh.
Menu Trees
The following menus organize operations and commands into logical
groupings:
• The
Setup
menu consists of commands that administrators can use to
set up and configure various aspects of the library, including
partitions, I/E station slots, cleaning slots, control paths, network
settings, drive settings, users, notifications, date and time, licenses,
FC I/O blades, and e-mail.
Note:
Do not use your Internet browser
Back
button to navigate the
Web client pages. Instead, use the buttons provided within the
Web client.
Note:
Log out of the library before closing the Internet browser
window when you are using the Web client. If you do not log
out, the session will remain open.