Dell PowerVault ML6000 - Manual (Page 96)

Chapter 5 Configuring Your Library
Working With User Accounts
Dell PowerVault ML6000 User’s Guide 96
The path to open the appropriate screen is as follows:
• From the Web client, select
Setup > Notifications > RAS > Receiver
Addresses > Create
.
Modifying RAS E-mail
Notifications
5
Administrators can modify existing e-mail notification settings at any
time after the e-mail notification is created. For example, you can modify
the e-mail address; add, delete, or modify a comment; change the filter
level; and enable or disable the notification. For more information on
filter levels, see Working With RAS E-mail Notifications on page 94.
The path to open the appropriate screen is as follows:
• From the Web client, select
Setup > Notifications > RAS > Receiver
Addresses > Modify
.
Deleting RAS E-mail
Notifications
5
Administrators can delete an e-mail notification when it is no longer
needed.
The path to open the appropriate screen is as follows:
• From the Web client, select
Setup > Notifications > RAS > Receiver
Addresses > Delete
.
Working With User Accounts
Administrators can create local user accounts on the library for local
authentication, or enable and configure the Lightweight Directory Access
Protocol (LDAP) for remote authentication. You may use either or both
methods, according to your needs. This section covers how to set up user
accounts and authentication for both local and remote authentication.