Dell PowerVault ML6000 - Manual (Page 326)

Chapter 12 Installing, Removing, and Replacing
Removing and Replacing the Library Control Blade and LCB Compact Flash Card
Dell PowerVault ML6000 User’s Guide 326
14 Press
Next
.
The Network Configuration screen appears. The system defaults to
DHCP. For IPv4 only, you can deselect the DHCP option and assign a
static IP address. You cannot assign a static IP address for IPv6.
15
Accept the default settings by pressing
Apply
, or make any changes to
the network settings, and then press
Apply
.