Unpacking your library, Installing and rack-mounting – Dell PowerVault ML6000 User Manual
Page 9
Chapter 2 Setting Up the PowerVault ML6000 Library
Unpacking your Library
Dell PowerVault ML6000 User’s Guide
9
Unpacking your Library
• Open the I/E station door and remove the yellow strip in the I/E
station.
• Remove the orange robot restraint assembly securing the robot to the
floor of the library. You can access the restraint assembly either
through the library’s access door or through the top of the library if
you remove library’s the top cover.
Installing and Rack-Mounting
To properly and safely rack-mount the PowerVault ML6000, see the rack-
Chapter 12, Installing, Removing, and Replacing
.
Caution:
Remove all interior packaging material from the library
before powering the library on or installing the library in a
rack.
Note:
Save all packaging material in case you need to move or ship
the library in the future.
Caution:
ML6030 (and higher) CM and Expansion Modules require
professional installation. Professional installation may
have been included with your purchase. Please call
1-800-945-3355 to schedule professional installation of
your PowerVault library.