Dell PowerVault ML6000 - Manual (Page 251)

Chapter 12 Installing, Removing, and Replacing
Installing a New Multi-Module Library Configuration
Dell PowerVault ML6000 User’s Guide 251
a If you plan to stack the 5U Library Control Module at the top of
the library, and if a 9U Library Expansion Module will be located
below it, remove the 5U Library Control Module’s bottom cover
plate and the 9U Library Expansion Module’s top plate.
b
If you plan to stack the 5U Library Control Module between 9U
Library Expansion Modules, remove both the top and bottom
plates of the 5U Library Control Module. Also remove the top
plate of the 9U Library Expansion Module located below the 5U
Library Control Module and the bottom plate of the 9U Library
Expansion Module located above the 5U Library Control
Module.
c
If you plan to stack the 5U Library Control Module at the bottom
of the library, and if a 9U Library Expansion Module will be
located above it, remove the 5U Library Control Module’s top
plate and the 9U Library Expansion Module’s bottom plate.
Figure 34 Recommended
Module Locations
ML6010 ML6020 ML6030
ML6030 CM + 1
9U Expansion
Module ML6030 CM + 2
9U Expansion
Modules
cover plate
cover plate 9U Library
Expansion Module
cover plate 5U Library
Control Module
5U Library
Control Module
cover plate 5U Library
Control Module
9U Library
Expansion Module
9U Library
Expansion Module
cover plate 5U Library
Control Module
9U Library
Expansion Module
9U Library
Expansion Module
9U Library
Expansion Module
5U Library
Control Module
9U Library
Expansion Module
9U Library
Expansion Module
9U Library
Expansion Module
9U Library
Expansion Module
cover plate cover plate cover plate cover plate cover plate