Creating local user accounts, Modifying local user accounts – Dell PowerVault ML6000 User Manual

Page 98

Advertising

Chapter 5 Configuring Your Library

Working With User Accounts

Dell PowerVault ML6000 User’s Guide

Creating Local User
Accounts

During or after the initial configuration, you can use the default

administrator account to create up to eighteen additional local user

accounts, including other administrator accounts. These administrators

can themselves create other local administrator and user accounts. Users

without administrator privileges cannot create accounts. The library can

contain eighteen user accounts, including the default administrator

account.
To create local user accounts, you need to provide information for the

following fields:

•

User Name

— the login name of the user account you are creating.

User names are limited to 1–12 lower-case letters, numbers, and

underscores (_). For example:

john_usa

•

Password

— the unique password for the user account you are

creating. Passwords are limited to 6–16 lower-case alphanumeric

characters and can include also include underscores (_), periods (.),

hyphens (-), asterisks (*), and the “at” symbol (

). For example:

pass_19

•

Privilege

— is set to either

User

Admin

. See

User Privileges

page 54 for more information on user privilege levels.

The paths to open the appropriate screens are as follows:

• From the Web client, select

Setup > User Management > User

Accounts

• From the operator panel, select

Setup > User Mgmt> Create User

Modifying Local User
Accounts

After a local user account has been created, administrators can modify the

account settings, such as the password, privilege level, and partition

access. You cannot modify the user name. Instead, you will need to delete

the user account and create a new one.
To modify local user accounts, you need to provide information for the