Dell PowerVault ML6000 - Manual (Page 341)

Chapter 12 Installing, Removing, and Replacing
Installing the Library in a Rack
Dell PowerVault ML6000 User’s Guide 341
d Fasten a thumbnut to the end of each stud. Secure the rack
tightly, so that the ferrule fits snugly within the hole in the rack.
e
Next, install the shelf’s front studs in the rack’s front mounting
holes.
f If the studs do not reach the mounting holes, pull the front of the
shelf toward you to extend it to the necessary length. Hold the
base of the shelf with one hand, and pull the extensible part of the
shelf with your other hand.
g Insert the shelf’s front studs into the rack’s front mounting holes.
h
Fasten a thumbnut to the end of each stud. Secure the rack
tightly, so that the ferrule fits snugly within the hole in the rack.
Note:
Extending the shelves can be difficult, but they are
designed to be resized by hand. Do not use tools to
resize the shelves, and never take them apart.