Dell PowerVault ML6000 - Manual (Page 7)

Chapter 2 Setting Up the PowerVault ML6000 Library
Read this Section Before Unpacking and Installing the PowerVault ML6000
Dell PowerVault ML6000 User’s Guide 7
Details on positioning the library include:
• Make sure a power source (only of the type marked on the product
label) is available. See Library Specifications for power requirements.
• Route any cables to avoid walking on them or pinching them with
items placed on or against them. Pay particular attention to the cord
at the wall receptacle and the point where the cord exits from the
library.
• Make sure that objects will not fall and liquids will not spill into the
library’s chassis through openings.
Read this Section Before Unpacking and Installing the
PowerVault ML6000
This section includes important information you need to know before
unpacking, installing, and powering up your PowerVault ML6000
library.
Warning:
The power outlet must be available near the library and
must be easily accessible.
Warning:
Without tape drives, tape cartridges, or power supplies, a
5U Library Control Module weighs approximately 60 lbs
(27.2 kg). A 9U Expansion Module, without tape drives,
tape cartridges, or power supplies, exceeds 65 lbs (29.5 kg).
To avoid serious injury, two people are required to safely
lift the modules.