Dell PowerVault ML6000 User Manual
Page 329
Advertising
Chapter 12 Installing, Removing, and Replacing
Removing and Replacing the Library Control Blade and LCB Compact Flash Card
Dell PowerVault ML6000 User’s Guide
329
The library operator panel may display the following “upgrade in
progress” message; or it may blank out or change multiple times
during the firmware upgrade process.
23
When the firmware upgrade is complete, the login screen appears on
the operator panel.
24
Enter the following default user name and password:
• User name:
admin
• Password:
password
25
Press
OK
.
The Setup Wizard screen appears.
Note:
At this point the Scalar i500 Library is set up with factory
default settings.
Advertising