Dell PowerVault ML6000 User Manual
Page 284
Advertising
Chapter 12 Installing, Removing, and Replacing
Preparing to Remove or Replace a Module
Dell PowerVault ML6000 User’s Guide
284
13
Remove all power supplies from each module that you intend to
Adding, Removing, and Replacing Power
14
Remove all tape drives from each module that you intend to remove.
If you are going to replace the module, label the drives with their
locations so you can re-install them in the same locations later. For
details, see
Adding, Removing, and Replacing Tape Drives
1
Parking tab in “parked” position
Advertising