Metalfab SEW Eurodrive MOVIMOT MM..C - Manual (Page 32)

32
Operating Instructions – MOVIMOT® MM03C - MM3XC
5
Connection between MOVIMOT® and motor mounting close to the motor
Electrical Installation of MOVIMOT® Standard Design
5.6 Connection between MOVIMOT
®
and motor mounting close to the motor
If the MOVIMOT
®
inverter with option P2.A is mounted close to the motor, the connec-
tion to the motor uses a pre-fabricated cable. The following designs are possible on the
MOVIMOT
®
side:
• A: MM../P2.A/RO.A/APG4
• B: MM../P2.A/RE.A/ALA4
The APG 4 design results in the following connection options to the motor, dependent
upon the hybrid cable used:
Design A1 A2 A3 A4
MOVIMOT ® APG4 APG4 APG4 APG4
Motor Cable gland/termi-
nals ASB4 APG4 IS
Hybrid cables 0 593 231 9 0 593 076 6 0 186 741 5 0816 325 1
Ħ
0816 326 X
Ħ
0593 278 5
ᛴ
0593 755 8
ᛴ
See also... page 34 page 34 page 35 page 35
52198AXX
[1] Connection via terminals
A2
A3
ASB4
APG4
APG4
APG4
APG4
IS
A4
A1
[1]
APG4