Special function 4 – Metalfab SEW Eurodrive MOVIMOT MM..C User Manual
Page 62
62
Operating Instructions – MOVIMOT® MM03C - MM3XC
7
Selectable special functions MM..C-503-00
Startup of Standard Design
Special function 4
MOVIMOT
®
with bus parameter setting
Function descrip-
tion
Potentiometer f1 and switches f2 and t1 are deactivated. The settings of the potentiom-
eter and the switches are ignored by MOVIMOT
®
. The setting of the DIP switches con-
tinues to be read in by the unit. Functions selected via DIP switches cannot be changed
using the bus.
Block diagram
05599AXX
1
6
7
8
5
4
3
2
ON
S2
6
7
8
5
The function is implemented exclusively with bus operation via fieldbus interfac-
es MQ.. with integrated small control.
A parameter channel is available to operate the unit, and the values are saved in
EEPROM.
Read the following SEW-EURODRIVE manuals for additional information:
•
DeviceNet/CANopen Interfaces, Field Distributors
•
InterBus Interfaces, Field Distributors
•
PROFIBUS Interfaces, Field Distributors
50853AXX
[1] Fieldbus
[2] Diagnostic interface
RS-485
MOVIMOT
MQ..
UWS21A
P R O F
I
B U S
®
PROCESS FIELD BUS
[1]
PC +
MOVITOOLS
[2]
0
0
I