Cub Cadet 7000 Series - Manual (Page 27)

6 - 33
7264 Compact Tractor
22.9. Remove all three hex washer head tapp screws
securing the valve mounting bracket to the right
transmission mounting bracket using a 1/2”
socket. See Figure 22.9.
NOTE: Loctite™ the threads and torque them
between 160 and 200 In. Lbs. during assembly.
22.10. Remove the lift valve assembly and position
control.
23. UPPER HITCH ARMS:
23.1. Mark the orientation of the upper hitch arms to
the rock shaft. See Figure 23.1.
23.2. Remove the right upper hitch arm from the rock
shaft.
Figure 22.9
Hex Screws
Valve Bracket
Figure 23.1
Mark
Orientation
Right Arm
23.3. Remove the right spacer from the rock shaft.
See Figure 23.3.
23.4. Remove the retaining ring securing the left upper
hitch arm to the rock shaft. See Figure 23.4.
23.5. Remove the left upper hitch arm from the rock
shaft.
NOTE: The rock shaft can be pulled out of the
transmission housing cover.
Figure 23.3
Right Spacer
Rock Shaft
Figure 23.4
Retaining Ring
Left Arm
Rock Shaft
6