7264 compact tractor – Cub Cadet 7000 Series User Manual
Page 61
6 - 67
7264 Compact Tractor
23.
FOUR WHEEL DRIVE ASSEMBLY
INSPECTION:
23.1. Inspect the four wheel drive assembly for dam-
age or wear. See Figure 23.1.
23.2. Remove all six center-grooved steel rollers from
the internal overrunning clutch component and
inspect each one for wear or damage. See Fig-
ure 23.2.
NOTE: If the steel rollers are damaged, the
overrunning clutch assembly will need to be
replaced as an assembly.
Figure 23.1
LO 59T:HI 50T Drive Gear
Front Cover Assembly
Figure 23.2
Center Groove
Steel Rollers
23.3. Remove the long extension spring from the
perimeter of the internal overrunning clutch com-
ponent. See Figure 23.3.
23.4. Secure the front cover of the four wheel drive
shaft assembly in the soft jams of a vice. See
Figure 23.4.
23.5. Puncture the front oil seal using a pin punch.
Figure 23.3
Extension Spring
Steel Rollers
Figure 23.4
Soft Jaws
of a Vice
Front Cover
6