7264 compact tractor – Cub Cadet 7000 Series User Manual
Page 52
7264 Compact Tractor
16.2. Remove the drive spacer from the motor shaft.
See Figure 16.2.
16.3. Pull the motor shaft assembly forward until the
Hi 33T: 17T pinion drive gear can be removed.
16.4. Remove the Hi 33T: 17T pinion drive gear from
the motor shaft.
16.5. Remove the motor shaft assembly from the
transmission housing.
16.6. Remove the rear ball bearing from the transmis-
sion housing. See Figure 16.6.
17.
FOUR WHEEL DRIVE ASSEMBLY:
17.1. Remove all four hex lock screws securing the
front cover to the transmission housing using a
1/2” socket. See Figure 17.1.
NOTE: Loctite™ the threads and torque them
between 160 and 200 In. Lbs during assembly.
17.2. Loosen the front cover from the transmission
housing using a large brass punch and hammer.
See Figure 17.2.
Figure 16.2
Drive Spacer
HI 33T:17T Drive Pinion Gear
LO: 24T: 17T
Drive Pinion Gear
2 Speed
Collar
Motor Shaft
Figure 16.6
Rear Ball Bearing
Figure 17.1
Hex Lock Screws
Front Cover
Hex Lock Screws
Figure 17.2
Brass Punch
Front Cover
6 - 58